Blog Layout

6 Factors To Consider Before Buying The Perfect Storage Tank

Apr 13, 2023
The Perfect Storage Tank

Having a water tank at home as a secondary water source can be beneficial, particularly in the unfortunate event of a water interruption. When this occurs, locals must cope with the inconvenience of transporting water buckets to and from the water tanker, which can be challenging for the elderly. These unwarranted anxieties and difficulties can be avoided by having a water tank at home.


However, picking a water tank for your house is not easy. Here are some guidelines to assist you if you want to install a brand-new water tank in your home or are unsure what size tank would be best for you.


Size

While purchasing a tank, the size of the tank should be the first factor taken into account. It's crucial to think about the installation space you have before purchasing a water tank.


When selecting a water tank's capacity, the basic rule of thumb is to estimate your consumption and divide that amount by 300 gallons per day. This provides an estimate of the number of days' supply of clean drinking water that can accommodate in the chosen capacity before extra storage is required.


There are many different sizes and shapes for water tanks. As such, you must make sure that the tank's dimensions fit the available space.


Material

polyurethane tanks

Before purchasing a water tank, you should also think about the material. Stainless steel and polyurethane (poly tanks) are only a few materials used to make water tanks.


The advantages of poly tanks for holding water include the following:

  • Being lightweight
  • Resistance to rust
  • Leak-proof
  • Reliability


Moreover, plastic tanks are less expensive than stainless steel. However, keep in mind that poly tanks are prone to stress cracking and thermal expansion. 


On the other hand, stainless steel is also popular due to its durability and resistance to rust and heat. Additionally, this material is easy to maintain and clean. Water tanks made of high-grade stainless steel can keep your home's water supply safe and retain its quality.


Location

optimal location for water tanks

The optimal location for water tanks is above ground or on a rooftop. Water tanks are typically located at heights above ground for the following reasons:

  • Water naturally flows in the direction of gravity
  • The pressure increases with height


The construction of above-ground water tanks requires less labour and is less expensive. Due to its above-ground location, it is easier to spot damages and repair them without the use of specialised tools.


If you choose a stainless steel tank, you may install it directly under the sun to assist the chlorine in the water evaporating, reducing the chlorine's odour and making your water taste better.


Shape

Tanks made of stainless steel typically come in a few shapes. They are either cylindrical or circular, and they can be standing or lying down. The only distinction is whether one has taken a stand or not.


The optimal shape, however, would be a cylindrical storage tank. This makes liquid transfer quicker and guarantees a uniform and slick distribution of water pressure. Since surface heat radiation is reduced in circular objects, the water temperature stays more constant.


Maintenance

The frequency of the tank's cleaning requirements is another crucial factor. Over time, bacteria, algae, and other microorganisms can contaminate water storage tanks. As such, the drinking water could be dangerous due to these impurities.


Cleaning the tank on a regular basis is necessary to maintain the water's safety. The following factors will determine the frequency of cleaning:

  • Size of the tank
  • The amount of use
  • The water quality


In general, it is recommended to clean above-ground tanks every two years and underground tanks every four years.


Warranty

The tank's warranty should also be a final question you remember to inquire about. A one-year warranty is often included with water storage tanks, although some manufacturers also offer extended warranties of up to five years.


Before you buy a warranty, be careful to read the fine print. While some warranties solely cover flaws in the materials and workmanship, others include cover damage brought on by the weather, insects, and other factors.


Choose The Perfect Water Storage Tank For The Convenience Of Your Family

The selection of a water storage tank involves several different considerations. However, you can discover the ideal tank for your home by taking the time to consider your needs and doing some research.


Looking for a quality storage tank fabrication company in Malaysia? Choose Choong Ngai Engineering! 

So, if you're looking for stainless steel tank fabrication in Malaysia, visit us at Choong Ngai Engineering today to speak to our experts. We at Choong Ngai Engineering have years of experience and knowledge to answer your doubts or concerns, and we ensure to provide you with the quality solution you're looking for. Call us now!

Industries That Benefit From Metal Stamping

7 Industries That Benefit From Metal Stamping

18 Jan, 2024
Explore the various industries that benefit from the metal stamping technique and find out how metal bending services in Malaysia aid and progress these fields.
Round Metal Fabrication Malaysia

Powder vs Liquid Coating: What Are The Differences?

15 Jan, 2024
Discover the differences between liquid and powder coating with this informative article. Find out which method is best for you based on the needs of your project.

7 Common Types Of Welding Defects And How To Prevent Them

12 Jan, 2024
Welding, the modern industrial world's "alchemy," joins metals and other substances with the skill of a surgeon and the durability of a titan. However, flaws can occur in this complex combination of heat and metal. Welding flaws are sneaky rivals that can weaken structures and jeopardise integrity. In this piece, we'll take a tour of the welding world and look for the most common mistakes. We'll examine every imperfection, from porosity to cracks, identifying their causes and exploring methods to stop them from recurring. So, whether you're an expert welder or a newbie enthusiast, come along with us as we strive to perfect our craft and make every weld a shining example of our expertise. Overlap Overlap happens when the weld's face goes past its toe. As the filler material spreads over the entire weld joint and cools, fusing to the foundation material is difficult. Proper welding is the best way to avoid the overlap welding defect. The operator may avoid overlap by keeping the welding rod held at the proper angle and moving at a moderate pace. Welding too slowly can also result in an overlap. Craters Craters are a frequent welding flaw that develops during aluminium welding. They form at the weld bead's tip. Ignoring craters will create stress points, which will ultimately cause the weld to crack. Craters can be avoided by properly terminating the weld bead. They occur when the welding is halted before a pass is completed. Additionally, craters can be avoided by filling the space between the tack welds and the weld bead. Even in the unlikely event that craters form, they can usually be repaired, provided the weld bead is intact. Simply fill in the crater by creating an arc from a point immediately beyond the hole and going back over it. Porosity

Exploring Metal Stamping and Their Benefits

11 Jan, 2024
Metal stamping is an advanced and widely utilised manufacturing process that has come a long way since its beginnings in coin-making during the 7th century. It’s used to create components for various industries such as automotive, electronics, etc., while also being able to save time and money through efficiency while ensuring precision parts of high quality are delivered. In this blog post, we’ll cover all aspects of metal stamping, including its many methods and machines involved in the process, and discuss its advantages when employed. What Is Metal Stamping? Metal stamping is a process that has been around since the seventh century when it was originally used to make coins. Today, metal stamping dies are employed to create shapes and patterns on sheet metal with high accuracy and efficiency for various industries. The advantages of this manufacturing method include: Low cost Versatility Rapid production cycles Precision results in its formation Unfortunately, certain types of metals cannot be effectively shaped using this technique, which should be taken into account by users considering such an approach. Die-stamping techniques include progressive die stamping (for mass-producing parts) and transfer punching, where punches remove material from one area at once while transferring them simultaneously onto another piece. Four-slide equipment or multi-slide presses allow complex geometries and intricate designs, among other applications. At the same time, fine blanking can deliver precise cutting dimensions due to specialised tool designs especially suited for softer materials like aluminium alloys. These technologies bring unique benefits depending on requirements and/or industry needs, making them ideal choices based on those parameters. The Various Types Of Metal Stamping Process
Sheet Metals In Architecture

Sheet Metals In Architecture: What To Know and Benefits

08 Nov, 2023
Discover architecture's elegant union of art and engineering with sheet metal fabrication. Find out the benefits that are altering the way modern buildings are built.
Metal Fabrication Safety Measures

7 Metal Fabrication Safety Measures To Remember

02 Nov, 2023
Discover the most crucial safety measures for metal fabrication in Malaysia. Learn how these precautions are vital for protecting artists in this dynamic industry.
Exploring 6 Techniques To Cut Sheet Metal

Exploring 6 Techniques To Cut Sheet Metal: What To Know

31 Oct, 2023
Discover the fundamentals of sheet metal fabrication. Find out how these cutting techniques can help you become a better sheet metal fabricator.
Ball Screw And How Are They Used

What Is A Ball Screw And How Are They Used?

27 Oct, 2023
Learn about the importance of ball screws in heavy machinery spare parts in Malaysia. Discover how these vital parts improve machinery precision and efficiency.
Sheet Metal Fabrication Used In The Automobile Industry

How Is Sheet Metal Fabrication Used In The Automobile Industry?

04 Oct, 2023
Metal fabrication in Malaysia is vital for the creation of automobiles. Read to find out more about how metal fabrication contributes to the automobile industry.
Metal Spinning And What Are Their Advantages

What Is Metal Spinning And What Are Their Advantages?

02 Oct, 2023
Metal spinning is the shaping of metal while using pressure to mould it into the desired shape. Discover the benefits of metal bending services in Malaysia.
More Posts
Share by: